Working temperature:≤100✬OUR ADVANTAGES:1)30 years of experience of valvesresearch and development, manufacture and salesĢ)Cast valve body is our own production, the price is more competitive. Working medium:Water, vapour ,oil, corrosive medium flanged connectedPRODUCT PERFORMANCE:Nominal pressure:1.0/1.6MPa Water handling applications, where Y-Strainers are used to protect equipment that could be damaged or clogged by unwanted sand, gravel or other debris, are very common. Y-Strainers are used in a wide variety of liquid straining applications to protect downstream process system components in many industries, including: chemical processing, petroleum, power generation and marine. For applications with heavier dirt loading, Y-Strainers can be fitted with a 'blow-off' connection that permits the screen to be cleaned without removing it from the strainer body. Where the amount of material to be removed from the flow is relatively small, resulting in long intervals between screen cleanings, the strainer screen is manually cleaned by shutting down the line and removing the strainer cap. Y-Strainers are very cost effective straining solutions in many applications. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment. Hanger (As a basis for user- defined hangers see ISODRAFT User Guide, Section 10.Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. Socket Weld Swept Y-type Tee with user- definable out- and off- legs Screwed Fitting Eccentric Reducer with Tee

Socket Weld Y-type Cross with user- definable out- and off- legsģ-Way Control Valve with Square IndicatorĤ-Way Control Valve with Square IndicatorĪngled Control Valve with Square Indicator Pulled Weld Lobster Back Bend with Lobster Back Bend with Tee Note also that the ** mark in the first column can be changed based on its end connection.Replace the ** characters in the symbol key with one of the following end condition identifiers:įlanged Return Weld Lobster Back Lobster Back Bend If the 4th column of the list above indicated as YES, then the SKEY can be used as the base skey for creating new skey. Below is the list of symbol key (SKEY) that is used in paragon so that your component can be viewed in isodraft.

Y strainer isometric symbol